ICUTRONIC Intelligent – DALI (SELV)
Produktegenskaper
- Nätfrekvens: 0 Hz | 50 Hz | 60 Hz
- Versatile scope of application due to output power range of up to 71.4 W
- Matningsspänning: 220…240 V
- Tillgänglig med utströmsområde: upp till 1 400 mA
Produktfördelar
- Versatile SELV DALI driver up to 75 W due to flexible output characteristic
- Flexible current setting (RSet)
- High-quality dimming of 10…100 % by amplitude dimming
- No TouchDIM nor Corridor Function
- High quality of light thanks to <3% output ripple current
- Low standby consumption ≤ 0.5 W
Products
| Produktnamn |
|
|
|
|
|
Specifikationer | ||
|---|---|---|---|---|---|---|---|---|
|
ETi DALI 25/220...240/500 LT2 L
|
20…51 V | 180...500 mA | 280,0 mm | 30,0 mm | 21,0 mm | ||
|
ETi DALI 35/220…240/700 LT2 L
|
20…51 V | 350…700 mA | 280,0 mm | 30,0 mm | 21,0 mm | ||
|
|
ETi DALI 75/220...240/1A4 LT2 L
|
20…51 V | 600…1400 mA | 280,0 mm | 30,0 mm | 21,0 mm |
Mer information om produktfamiljen
Användningsområde
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J, except those used in high-risk task areas, i.e. those systems must not be used in workplaces where operators and other occupants of the premises are involved in potentially dangerous processes or situations.
- Lämplig för armaturer med skyddsklass I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.