LINEARlight FLEX DIFFUSE Side White

Produktegenskaper
  • Long operational length per single power feed up to 10 m
Produktfördelar
  • Reliable connection over long periods of time: IP67 connector with built-in protection against liquids penetrating through the wires into the LED strip

Products

Sort by:
Produktnamn
Ljusfärg (angiven)
Färgtemperatur
Färgåtergivningsindex Ra
Ljusflöde per meter
Nominell wattstyrka per meter
Specifikationer
LFD400S-G2-824-10
2400 K 2440 K 80 390 lm 8,9 W
LFD400S-G2-827-10
2700 K 2815 K 80 440 lm 8,9 W
LFD400S-G2-830-10
3000 K 3075 K 80 460 lm 8,9 W
LFD400S-G2-840-10
4000 K 3875 K 80 460 lm 8,9 W
LFD400S-G2-924-10
2400 K 2395 K 90 390 lm 8,9 W
LFD400S-G2-927-10
2700 K 2730 K 90 400 lm 8,9 W
LFD400S-G2-930-10
3000 K 2985 K 90 430 lm 8,9 W
LFD400S-G2-940-10
4000 K 3820 K 90 390 lm 8,9 W
LFD600S-G2-824-06
2400 K 2440 K 80 590 lm 13,5 W
LFD600S-G2-827-06
2700 K 2815 K 80 630 lm 13,5 W
LFD600S-G2-830-06
3000 K 3075 K 80 680 lm 13,5 W
LFD600S-G2-840-06
4000 K 3875 K 80 690 lm 13,5 W
LFD600S-G2-924-06
2400 K 2395 K 90 540 lm 13,5 W
LFD600S-G2-927-06
2700 K 2730 K 90 600 lm 13,5 W
LFD600S-G2-930-06
3000 K 2985 K 90 600 lm 13,5 W
LFD600S-G2-940-06
4000 K 3820 K 90 620 lm 13,5 W
LFD1000S-G2-824-04
2400 K 2440 K 80 830 lm 21 W
LFD1000S-G2-830-04
3000 K 2815 K 80 1000 lm 21 W
LFD1000S-G2-827-04
2700 K 3075 K 80 980 lm 21 W
LFD1000S-G2-840-04
4000 K 3875 K 80 1050 lm 21 W
LFD1000S-G2-927-04
2700 K 2730 K 90 840 lm 21 W
LFD1000S-G2-930-04
3000 K 2985 K 90 900 lm 21 W
LFD1000S-G2-940-04
4000 K 3820 K 90 900 lm 21 W
LFD400S-G1-830-06
3000 K 2845 K >80 450 lm 7,2 W
LFD400S-G1-835-06
3500 K 3575 K >80 450 lm 7,2 W
LFD400S-G1-840-06
4000 K 4065 K >80 450 lm 7,2 W
LFD400S-G1-850-06
5000 K 5075 K ≥80 430 lm 7,2 W
LFD400S-G1-865-06
6500 K 6900 K >80 380 lm 7,2 W
LFD400S-G1-924-06
2400 K 2305 K ≥90 340 lm 7,2 W
LFD400S-G1-930-06
3000 K 2845 K ≥90 370 lm 7,2 W
LFD400S-G1-935-06
3500 K 3595 K ≥90 390 lm 7,2 W
LFD400S-G1-940-06
4000 K 4085 K ≥90 390 lm 7,2 W
LFD400S-G1-965-06
6500 K 6790 K ≥90 380 lm 7,2 W
LFD600S-G1-827-06
2700 K 2650 K >80 650 lm 11,5 W
LFD600S-G1-835-06
3500 K 3575 K >80 680 lm 11,5 W
LFD600S-G1-840-06
4000 K 4080 K >80 680 lm 11,5 W
LFD600S-G1-865-06
6500 K 6420 K >80 560 lm 11,5 W
LFD600S-G1-924-06
2400 K 2300 K ≥90 510 lm 11,5 W
LFD600S-G1-930-06
3000 K 2835 K ≥90 550 lm 11,5 W
LFD600S-G1-935-06
3500 K 3560 K ≥90 570 lm 11,5 W
LFD600S-G1-940-06
4000 K 4025 K ≥90 570 lm 11,5 W
LFD600S-G1-965-06
6500 K 6530 K ≥90 560 lm 11,5 W

Mer information om produktfamiljen

Användningsområde
  • Skyltar och ljusreklam
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Nedladdningar

Onlineverktyg