LFD1000S-G2-930-04
Produktfördelar
- IP68 protection with high performance silicone
- Reliable connection over long periods of time: IP67 connector with built-in protection against liquids penetrating through the wires into the LED strip
Användningsområde
- Skyltar och ljusreklam
Tekniska data
Elektriska data
Nominell wattstyrka per meter
21 W
Fotometrisk data
Ljusflöde per meter
900 lm
SDCM Standardavvikelse färgmatchning
≤3 sdcm
Färgåtergivningsindex Ra
90
Mått
produktvikt
695,00 g
Längd
4000,0 mm
Bredd
14,1 mm
Höjd
10,80 mm
Tillägg produktdata
ID of contained light source [AGGR]
LS_TRV_286465
Logistikdata
Statistiskt varunummer
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
07-07-2023
Primary Article Identifier
4062172271257
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
e9ead098-1d6e-4fef-8504-a12333836386
Förpackningsinformation
EAN |
Enhet |
Styck |
Mått |
Vikt |
Volym |
---|---|---|---|---|---|
4062172271257 |
FS
| 1 | 410mm x 415mm x 37mm | 1535.00g | 6.30dm³ |
4062172271264 |
VS
| 6 | 420mm x 246mm x 430mm | 9570.00g | 44.43dm³ |
Nedladdningar
Valfria tillbehör
Mer information om produktfamiljen
Produktegenskaper
- Long operational length per single power feed up to 10 m
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.