OPTOTRONIC FIT D CS L (Dip Switch) EL
Produktegenskaper
- Nätfrekvens: 0 Hz | 50 Hz | 60 Hz
- Matningsspänning: 220 240 V
- Nätspänning: 198 264 V
- Wide output current range
- Livslängd: upp till 100,000 h (temperatur vid Tc = 65 °C, max. 10 % utfall)
Produktfördelar
- Flexible current setting (DIPswitch 6 currents)
- Högre ljuskvalitet tack vare låg utgående rippelström
- User flexibility with six different output currents from one driver
- Säkerhetskrav på grund av överbelastnings-, övertemperatur-, kortslutningsskydd
- Lång tillförlitlig livslängd vid maximalt tillåtna temperaturer
- Enable slim fixture design with flat 21 mm height metal housing
Products
Produktnamn |
|
|
|
|
|
Specifikationer | ||
---|---|---|---|---|---|---|---|---|
OT FIT 18/220
240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 40/220
240/350 D CS L
|
40 120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 60/220
240/350 D CS L
|
90 175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 75/220...240/550 D CS L
|
90 216 / 90 188 / 90 167 / 90 150 / 90 136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 210,0 mm | 30,0 mm | 21,0 mm |
Mer information om produktfamiljen
Användningsområde
- Lämplig för armaturer med skyddsklass I
- Installation i nödbelysningssystem enligt IEC 61347-2-13, bilaga J
- Lämplig för installation i nödbelysningssystem enligt EN 60598-2-22
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.